PSV Power LifePO Battery 12 Volt 6 AH
PSV Power LifePO Battery 12 Volt 6 AH - LITBAT12.8V6AH
Availability:
JHB DBN PLZ
SKU: LITBAT12.8V6AH
R 552.00 incl.
R 480.00 excl.
OR
R 52.00 p/m x 12 months
with mobicred
Description
Specifications
Product
PSV Power LifePO Battery 12 Volt 6 AH
The PSV Power 12 volt 6 Amp hour LiFePO4 battery offers greater than 2000 charge cycles compared to an ordinary lead acid battery which offers up to 300 charge cycles. PSV Power batteries will last up to 7 times longer than an ordinarylead acid battery. The stable chemical composition and built in Battery management system in our batteries provide you with safe reliable power. Direct replacement for 12V 7Ah Lead Acid, suitable for use with – Gate Motor, Energiser, Alarm System. Only use this battery in a UPS where minimum low voltage disconnect can be set at 12v Warranty of 2 years unlimited cycles, Expected Life >5 years
Specs
| Specifications |
| 12 v Battery 6 Amp hour |
| LifePO4 Chemistry |
| 2000 plus charge cycles |
| Dimensions (LxWxH) 320mmx 170mmx215mm) |
| 2 Years Unlimited Cycle Warranty |
| Charging Parameters |
| Absorption /voltage 14.2v to 14.6v |
| Working temperature is 5 deg Celsius and 50 deg Celcius. (Best life of battery achieved between 5 deg and 30 deg) |
| Built in BMS |
| 6 Amp Continuous |
| High / Low voltage protection |
| Over charge protection |
| Over Discharge protection |
| Short circuit protection |
| Automatic cell balancing |
| Note |
| To increase voltage, series connection method is usede: |
| For example: 12V + 12V = 24V. When connected in series the capacity remains the same. |
| To increase capacity, parallel connection method is used: |
| For example: 7AH + 7AH = 14AH. When connected in parallel the voltage remains the same |
| Series & Parallel combinations are NOT Recommended |
| Safety |
| The battery storage needs to be in a dry environment to avoid humidity. |
| The battery needs to be charged every 6 months when not in use; |
| Avoid contact with metal objects, resulting in short circuit between positive and negative electrodes. |
| Avoid serious extrusion, impact and water inflow as it will cause internal circuit damage. |